Audio-Technica ATW-1301/L System 10 PRO Rack-Mount with Wireless Lapel Mic

All prices incl GST
This item ships FREE Australia Wide

  • Usually delivered in 1 to 5 days
  • Insured Shipping from Sydney

The System 10 PRO ATW-1301L from Audio-Technica is a digital 24-bit/48 kHz wireless microphone system that operates on the 2.4 GHz ISM band and is used to capture audio for applications such as live stage, theater, DJ setups, and more.

The System 10 PRO features a half-rack chassis that allows you to mount one or two receiver units, however the receiver units can be released from the chassis and mounted remotely (up to 328' away) via Ethernet cable. Up to five chassis or 10 receiver units can be linked using a RJ12 cable, creating a multi-channel system with up to 10 channels.

In addition, other features include an easy-to-read display on each transmitter and receiver unit for quick setup, clear and natural-quality sound, and three levels of diversity, namely frequency, time, and space. Frequency Diversity sends the signal on two allocated frequencies, Time Diversity sends the signal in multiple time slots, and Space Diversity uses two antennas on each transmitter and receiver unit, thus to help maximize signal integrity.

The System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters, one ATW-RU13 receiver unit with corresponding AT8690 receiver unit mounting brackets, one RJ12 cable, one AC adapter, one lavalier microphone, and one ATW-T1001 UniPak bodypack transmitter.

Overall System Specifications
Operating Frequencies 2.4 GHz ISM band
Dynamic Range >109 dB (A-weighted), typical
Total Harmonic Distortion <0.05% typical
Operating Range 60 m (200′) Open range env. with no interfering signals
Operating Temperature Range 0° C to +40° C Battery performance may be reduced at very low temperatures
Frequency Response 20 Hz to 20 kHz 
Depending on microphone type
Receiving System Diversity (frequency/time/space)
Output Connectors Remote Receiver Connector: RJ45 
Link Connector: RJ12
Maximum Output Level XLR, balanced: 0 dBV 1/4″ (6.3 mm), unbalanced: +6 dBV
Power Supply 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
Dimensions 209.8 mm W x 44 mm H x 169.3 mm D
Net Weight 940 grams
Accessory Included Power supply
Accessories Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet
RF Power Output 10 mW
Spurious Emissions Following federal and national regulations
Input Connections Four-pin Locking Connector 
Pin 1: GND, Pin 2: INST INPUT, 
Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
Batteries Two 1.5V AA 
not included
Battery Life >7 hours (alkaline) 
Depending on battery type and use pattern
Dimensions 70.2 mm W x 107.0 mm H x 24.9 mm D
Net Weight 100 grams 
AT829CW - Cardioid Condenser Lavalier Microphone
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 70-16,000 Hz
Open Circuit Sensitivity -42.8 dBV (7.3mV) re 1V at 1 Pa
Signal to Noise Ratio 67.1 dBA, 1 kHz at 1 Pa
Weight 2.4g
Dimensions 24mm long, 10.5mm diameter
Cable 1.4 m long (permanently attached to microphone), terminated with HRS connector
Accessories AT8131 foam windscreen; AT8434 clothing clip;
SKU 6510
Brand Audio-Technica

Be The First To Review This Product!

Help other Discount Digital Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

Supplied with:

  • System 10 PRO ATW-RC13 Rack mount
  • System 10 PRO ATW-RU13 2.4GHz receiver unit
  • System 10 ATW-T1001 Wireless Transmitter unit
  • AT829CW lapel microphone